[GreenKeys] [External] Re: LESU stud replacement.

[w9ddd at tapr.org]

Thanks all who replied.   Be it a #2 Phillips, drift pin or awl (scratcher?), the hard part for me was always the bottom hole of the LESU.  I think the 3 cables exiting the left end were  keeping me from getting the stud in the completely vertical position to hit the bottom hole.  Once I pushed the cables around a bit it seemed to help.  I also removed the cover of the line shunt relay to give my fingers a little more room to operate.

I think I have all the funny stuff removed from the cabinet/LESU wiring and now moving on to keyboard cleaning and lubrication. 

John, W9DDD


> On Aug 16, 2020, at 10:45 PM, Jones, Douglas W <douglas-w-jones at uiowa.edu> wrote:
> 
> 
> From: Roy Morgan <k1lky68 at gmail.com> -- Sunday, August 16, 2020 10:34 PM
> 
> In the Navy it's called a marlin spike. In your shop it might be a Phillips screwdriver ...
> The term drift pin comes to mind.  Even the big ones used on construction sites are called that, or sometimes just a drift.
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
>>>> Jordan Spencer Cunningham's GreenKeys Search Tool: https://teletype.net/gksearch
>>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w9ddd at tapr.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20200818/8c9da36f/attachment.html>