[GreenKeys] Mite TTY Question

[Mark J. Blair]

> On Apr 5, 2020, at 12:47 PM, Jerry Murphy <gfmurphy at earthlink.net> wrote:
> 
> 
> The included manual is for Model 28 machines.  The manual has nothing to do with Mite machines.  I know 
> of no source for parts.  The data plate says that it is for use on a 400 Hz supply so I would assume that it
> has a 400 Hz motor and was intended for use on aircraft.  The manufacturer made 60 Hz motors for these
> machines.  If you must have one of these machines, you should wait for one with a 60 Hz motor and in
> running condition.

I have a 400 Hz model that I plan to use with a PRC-47 eventually. Figuring out a good source of 400 Hz power for both the Mite and the PRC-47 is all on me, but I do need to find a mating connector to plug into my Mite.

-- 
Mark J. Blair <nf6x at nf6x.net>
http://www.nf6x.net/