[GreenKeys] Video - Model 26 working / baudotrss question

[E.]

Zach,

You can also run command line in Terminal on your hackintosh (I do on my Mac) with the Volpe board by using the following in Terminal:

To find the Volpe board:

ls /dev/cu.*

…then to connect with it, use:

screen /dev/cu.usbserial

( /dev/cu.usbserial is just an example of what the Volpe board address might look like in Terminal… the above command lines are if I remember them right ;p )

From there, you’re connected to the board via Mac ;) !  Haven’t had any troubles with baud rates and such on the Mac side…

...just sending this, since from the sounds of it, you’re running everything in Windows right now - or at least, as far as command line is concerned :) .


> On Sep 29, 2019, at 8:54 pm, Zach Zarzycki <shardsofaperture at gmail.com> wrote:
> 
> 
> https://youtu.be/aHB8tWwZXbg 
> 
> 
> 
> There she goes! I spend most of today getting the power supply and board hooked up as I wanted. I copy/pasted a news story into the terminal and let it rip, working pretty well!
> 
> I also had to learn how to build python which was a royal PIA as I've never been a fan of building from command line (using Windows to run everything right now, main pc is a hackintosh)
> 
> Has anyone with the volpe board been able to use baudotrss? I set up my config file, change the volpe board to passthough, played around with baud rates, and character sets.. But baudotrss just pulls the RSS feed, says polling news (tried a few different rss feeds) then in verbose " debug: Messager ignoring input"
> 
> It also printed TYP when it seemed to connect then won't push anything else to the teletype at all. If I close baudotrss, and open terminal, I have to actually reset the board in order to get any output from my terminal back to the teletype again!
> 
> 
> 
> 
> 
> 
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to hanyou at xsmail.com