[GreenKeys] Looking for cardboard cutout for a Hubbell plug...

[Scott Johnson]

Better yet, lightly tinned, pre-formed, and wrapped in a clockwise
direction.   

Scott V. Johnson W7SVJ
5111 E. Sharon Dr.
Scottsdale, AZ 85254-3636
H (602) 953-5779
C (480) 550-2358
scottjohnson1 at cox.net
scott.johnson at ieee.org

-----Original Message-----
From: greenkeys-bounces at mailman.qth.net <greenkeys-bounces at mailman.qth.net>
On Behalf Of Jeffrey Angus
Sent: Saturday, September 28, 2019 2:15 PM
To: greenkeys at mailman.qth.net
Subject: Re: [GreenKeys] Looking for cardboard cutout for a Hubbell plug...

On 9/28/19 4:06 PM, Cory Heisterkamp wrote:
> More concerning is the wires are wrapped around the screws the wrong 
> direction...
Yes, wires should ALWAYS be wrapped around the screw head in a clockwise
direction.


--
"I am a river to my people."
Jeff-1.0
WA6FWI
www.foxsmercantile.com

______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net

2002-to-present greenkeys archive:
http://mailman.qth.net/pipermail/greenkeys/
1998-to-2001 greenkeys archive:
http://mailman.qth.net/archive/greenkeys/greenkeys.html
Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to scottjohnson1 at cox.net