[GreenKeys] Looking for cardboard cutout for a Hubbell plug...

[John, W9DDD]

Since if I have one, it's probably not TTY related, is that the one with 
the pins at 90 degrees from each other, or the more standard 2 parallel 
pins with one wider than the other?

John, W9DDD
Ich habe dreimal abgeschnitten uns jetzt zu kurtz. (I cut it off 3 times 
and it's still too short.)

On 9/28/2019 3:26 PM, E. wrote:
> 
> This might be a long shot, but does anyone have a spare cardboard cutout for the two-pronged Hubbell plug that they are willing to part with, by chance ;o ?… the one that covers up the screw contacts, on the prong-side of the plug (for a 15/19)?  It’s probably a rare item but darn is it dangerous to leave those contacts exposed ;p .
> 
> Thanks in advance for looking at this ^^ .
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w9ddd at tapr.org
>