[GreenKeys] Rectifier voltage question...

[Peter Gottlieb]

1N4007’s would be fine. 


Peter

> On Sep 17, 2019, at 11:15 PM, E. <hanyou at xsmail.com> wrote:
> 
> 
> Thanks for all of the responses to my question!
> 
> For one question that was asked… the voltage range for this rectifier reads 105 to 125VAC.  There are solder lugs on the AC side - ones that jump 5 volts each, from 105 to 125.  Currently, it’s soldered to 120.  The output on the DC side reads 115 on the plate.
> 
> …then a question of my own… could someone please point me in the direction of a good silicon diode (or two - there are two on this rectifier) to use, in place of the Seleniums (maybe on Mouser)?  Probably mean more rewiring, since all of that wiring is as brittle as all get-go, but so be it ;p .  I’d like to keep this rectifier as close to being as it is as possible :) .
> 
> Thanks again and cheers ^^ !~
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to hpnpilot at gmail.com