[GreenKeys] [External] Model 33 chad box removal and reinstall

[JOHN]

Thank you, sir. Good info.

Yes, I’m lucky with this one. I should try and decipher the serial number to see when the machine was built.

John

Sent from Xfinity Connect App

------ Original Message ------

From: Jones, Douglas W
To: John Kelley
Cc: GREENKEYS BULLETIN BOARD
Sent: September 6, 2019 at 11:35 AM
Subject: Re: [External] [GreenKeys] Model 33 chad box removal and reinstall

On Sep 4, 2019, at 4:48 PM, JOHN wrote: > ... dumb question: how does this install on the bottom of the unit? The left side of the pedestal that supports the Model 32 and 33 doesn't quite come up to mate with the bottom pan of the machine. The flange on the side of the chad box slides in from the front into the gap between pedestal and bottom pan. There's a slight ridge under the tape punch that prevents the chad box from sliding out to the side, so it's held securely against the pedestal. That's a beautiful chad box. Most of them turn quite yellow with age. It must be from near the end of the production run. Doug Jones jones at cs.uiowa.edu
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20190906/e65c0b94/attachment.html>