[GreenKeys] Volpe board figs/letters function?

[John, W9DDD]

Try control G on your PC keyboard?  Of course it does something 
different in every application, so the search goes on?

John, W9DDD
Ich habe dreimal abgeschnitten uns jetzt zu kurtz. (I cut it off 3 times 
and it's still too short.)

On 10/10/2019 3:12 PM, E. wrote:
> 
> Hey all,
> 
> On the v2 version of the Volpe board, how does one get to both figures and letters using a computer keyboard through the board ;o (for example, ringing the bell when in letters - the only way I can get it to do it right now is by having the 19 in figures by punching figures in first on the Teletype keyboard, then ringing the bell on the computer keyboard)???  I know that Jordan Spencer Cunningham has some custom firmware on his boards that might do this, but am not sure ;o … trying to figure it out ;p .
> 
> Thank much in advance ^^ !!!
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w9ddd at tapr.org
>