[GreenKeys] Looking for help with KSR33
Nick England
navy.radio at gmail.com
Sat Jul 13 20:23:30 EDT 2019
I have no M33 experience, but am curious. The 28 typing reperf uses a
similar typewheel and hammer. The early 28 reperfs had a steel hammer. Did
the typewheel material change so that bare steel was very destructive on
the M33?
Idle curiosity.
Nick
On Sat, Jul 13, 2019 at 7:50 PM WAYNE <teletypeparts at comcast.net> wrote:
> Alf,
>
>
> You need to stop typing right away. The metal type hammer is likely
> damaging the typewheel.
>
>
> Temporarily you can use a piece of vinyl tubing after cleaning off the old
> rubber hammer. See pic. Ignore pic description and red arrow. I dont
> remember the size of the tubing as we are using a vinyl replacement hammer
> now but you cut it long enough to slide all the way to the bottom of the
> metal hammer T.
>
>
> Hopefully, the typewheel is not damaged too much.
>
>
> The other possibility is the ribbon is not moving on the spools.
>
>
> Best regards,
>
>
> Wayne
>
> On July 13, 2019 at 6:24 PM Alf Fisher <alffisher2 at gmail.com> wrote:
>
>
> Hello GreenKeyers,
>
> I got the urge to dig out my KSR33 that hasn't run for several years.
>
> After a check over, it works quite well apart from needing a new ribbon.
>
> The problem I have is the print gets faint along each line with the
> subsequent lines getting faint a bit further along then it is faint at
> the start of, say the 4th line and so on.
>
> When its in a faint print position, the sound is softer like the
> typehead isn't hitting the page as hard
>
> Is this likely to be caused by a worn typehead hammer? It has quite a
> hollow in it.
>
> Maybe it is something completely different so I'm looking for some help
> and advice please.
>
> Also could do with some guidance on the lubrication points as I don't
> really think I want to splash oil everywhere!
>
> 73,
>
> Alf, G3WSD
>
>
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> 2002-to-present greenkeys archive:
> http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive:
> http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
> http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to teletypeparts at comcast.net
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> 2002-to-present greenkeys archive:
> http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 <http://mailman.qth.net/pipermail/greenkeys/1998-to-2001>
> greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
> http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to navy.radio at gmail.com
--
Nick England K4NYW
www.navy-radio.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20190713/d23d9068/attachment.html>
More information about the GreenKeys
mailing list