[GreenKeys] reperf turn on/off

[Steve Garrison]

I thought the sequences ZCZC and NNNN were just used to indicate the beginning and ends of messages since the "hole" patterns were easily recognizable by the "tape apes" having to handle all the tape messages.  I don't recall any of the machines that I worked on turning on with ZCZC and off with NNNN.  At least in the comm centers I supported.  Although that number was rather small when compared to all the comm centers in all branches of the military back in the mid 60s!

Steve G./N4TTY
Sent from my iPhone

> On Feb 25, 2019, at 2:57 PM, Ken Stritzel <stritzel at svs.com> wrote:
> 
> i have a 28ksr and i would like to control my reperf remotely using "standard" key
> sequence.  for example, arrl sends ZCZC for printer on and then NNNN for printer off.
> i would like to program the stunt box with "reperf on/off" stuff.  but, before i
> start poking around, i thought i would ask if there is a standard.  it might even
> be ZCZC and NNNN?
> 
> THANKS!
> 
> Ken - W9AEK
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to steve.n4tty at gmail.com