[GreenKeys] M28 features for RTTY operation today?
Russ Miller
wa3frp at gmail.com
Mon Feb 25 08:04:39 EST 2019
Hi Nick,
MMTTY has two options that apply:
The first is to send an automatic CR LF at the start of every
transmission. The other option that can be selected is "word wrap on
keyboard" That option keeps the letter of a word together when you get to
the end of a line. However, this is only on the computer screen of the
transmitting station as the size of the MMTTY window will vary depending on
how the individual operator has set up his MMTTY window. Neither is a big
help for a mechanical RTTY machine operator.
The bottom line that always works for me...install "non-overline" and "auto
CR LF" per the instructions from Irv in RTTY Journal. Remember, you can
also use the red LOC LF and LOC CR keys if something goes wrong.
Thanks 73
Russ WA3FRP
On Mon, Feb 25, 2019 at 6:13 AM Steve Garrison <steve.n4tty at gmail.com>
wrote:
> That's what was used during my Air Force days!
>
> Steve G./N4TTY
> Sent from my iPhone
>
> On Feb 24, 2019, at 10:05 PM, Ralph Irish <w8roi at wowway.com> wrote:
>
> *Going back to my Navy days as a Radio Operator, the 'standard' procedure
> when communicating*
> *by Teletype was to type:*
>
> *CR CR LF LTRS *
>
> *at the end of each line. This assured that the different styles of
> teleprinters would all*
> *have their carriage at the left margin and be prepared for the next line
> of information.*
> *It had very little effect on 'throughput' and the extra few characters
> assured, in most*
> *cases, that the next line would have a 'clean start'.*
>
> *When sending things like weather data, with a lot of 'numerical groups',
> the LTRS character*
> *may well have been omitted to save the requirement of typing FIGS to
> get back into Upper*
> *Case.*
>
> *I noted that most hams did much the same, over my years active on
> Teletype. It was 'second*
> *nature' to me. CR CR LF LTRS*
>
> *73,*
>
> *Ralph - W8ROI*
>
> *- - - - - - - -*
>
> *On Feb 24, 2019, at 5:40 PM, Russ Miller wrote:*
>
> *Nick, *
>
> *I did a quick check with MMTTY - which is one of the most popular
> freeware applications for sending and receiving RTTY using a computer. *
>
> *MMTTY send CR LF when the "enter" key is pressed.*
>
> *Hope that this helps! See you on-the-air 73*
>
> *Russ WA3FRP*
>
>
>
> *On Sat, Feb 23, 2019 at 4:51 PM Ralph Irish <w8roi at wowway.com
> <w8roi at wowway.com>> wrote:*
>
>>
>> *What a lot of 'Irv's enemies' didn't know was that after a few paper run
>> outs, Irv came up*
>> *with a stunt box fix that would not allow multiple LFs to take place
>> unless some number of*
>> *printing characters had been sent. So, some clown would sit there and
>> type endless LFs,*
>> *laughing all the time, not knowing that in most cases, Irv was sitting
>> on his end, laughing*
>>
>> *even harder as the machine cycled and only one or two line feeds were
>> accomplished.*
>>
>>
>> *- - - -*
>>
>>
>> *Not certain of the timeframe, but sometime later, Irv got to borrow some
>> kind of 'mini-computer'*
>>
>> *(Data General comes to mind) and wrote routines to circumvent any such
>> nonsense. All data *
>>
>> *from the TU had to pass through the 'Mini' thence to the Model 28's
>> Selector Magnet Driver. *
>>
>>
>> *He even wrote routines to make his 'output' have 7.5, 8, 9 and 10 unit
>> code, with all of the excess*
>>
>> *being put into the STOP pulse. This made for some most interesting
>> 'sounding' mechanical action*
>>
>> *from the Teletype, whether it was a Model 28 or 15, etc. Throughput was
>> still very close to what*
>>
>> *it would have been with 7.41 or whatever. I'm certain that the
>> mathematicians among G/K can*
>>
>> *do some number crunching and convert to OPM and come up with some exact
>> number of WPM.*
>>
>>
>> *Irv was a nice guy, and he was misunderstood by many. I was not 'one of
>> his biggest fans', but*
>>
>> *you have to put credit where it belongs. Without his efforts, those 100
>> and some Model 28s would*
>>
>> *have been sold by Pacific Bell (or whomever) and never seen by any
>> hams. You might say that he*
>>
>> *was 'ego driven' as are many creative people. His original Mainline
>> TT/L from the early-mid 60s*
>>
>> *was almost a 'giant step' past the W2JAV units very commonly used by
>> many, back in the 50s*
>> *through the early 60s. Petersen's 1967 'revamp' called the TT/L-2 TU
>> was almost as large a 'giant*
>>
>> *step' past the original TT/L, and that device won over many hams as far
>> as striving for near perfect*
>>
>> *copy under varying band conditions. There were PC Boards made for most
>> of the circuitry, and*
>>
>> *other PC boards for specific sets of bandpass filters and Mark/Space
>> channel filters. A fellow in*
>>
>> *Texas whose name/nickname was "Curly" made some of these boards, and
>> sold them for little*
>>
>> *profit. He provided manufacturer's part numbers for tube sockets and
>> terminal strips and other*
>>
>> *items for those who wanted a great looking and performing TU. *
>>
>>
>> *Over time, Petersen, with help from some Detroit area 'locals' came up
>> with part value mods for*
>>
>> *the TT/L-2 and those who took the time to make the changes found the
>> 'error rates' dropping a*
>>
>> *bit.*
>>
>> *At that time, Truman Boerkel, K8JUG (later K9JUG), worked for a "parts
>> house" in the Chicago *
>> *area and put together kits of parts for those who wished to have a
>> finished unit work as Petersen*
>>
>> *wanted it to work. I suspect that there are still many of those 'kit
>> sourced' TT/L-2 units working*
>>
>> *quite well, if they were not allowed to 'sit idle' for decades.
>> (Nothing lasts forever!!)*
>>
>>
>> *Petersen specified some special switches for the unit, and using another
>> could have caused some*
>> *'mode-switching glitches' and less than ideal print. Truman made sure
>> that the 'house' had the*
>> *correct spec-ed switches for these kits. (Not talking about rotary
>> switches, but two and three*
>>
>> *position toggle switches.) *
>>
>>
>> *I have very find memories of those days. I was fortunate to find a TT/L
>> built with all 'point-to-*
>>
>> *point' wiring, on a 3" x 17" x 15" chassis, good 19" rack mount front
>> panel and decent labeling*
>>
>> *on the panel. It served me for years. I had it on the summer "East
>> Coast Autostart" channel,*
>>
>> *3637.5 KHz. My receiver was a TMC with crystal positions with
>> 'hz-shift' of the crystal circuit*
>>
>> *for near exact freq setting. It also had a crystal socket for the BFO,
>> for even better 'on the *
>>
>> *cycle' setting of the audio coming out of the receiver to the TU. My
>> 80M inverted "VEE" was*
>>
>> *about 30 feet at the feedpoint and I had favorably located trees for the
>> ends. One of the best*
>>
>> *time of my 'ham radio life' was that time period. I built (and still
>> have) a simple small chassis*
>> *crystal oscillator circuit with a piston trimmer that I plugged into my
>> Heath DX-35 transmitter's*
>> *crystal socket. By 'zeroing' stations on the air who were known for
>> their precision, I stayed on*
>>
>> *freq, and had only one person ever question my signal frequency. (We
>> were both off a little bit!)*
>>
>>
>> *Those were the days!!*
>>
>>
>> *73,*
>>
>>
>> *Ralph - W8ROI*
>>
>>
>> *- - - -*
>>
>>
>> *Irv Hoff: K8DKC, Ann Arbor, MI later W6FFC in California;
>> Military pilot, later airline pilot*
>>
>> *Keith Petersen: W8SDZ, Ohio, later Michigan resident. Lived elsewhere
>> at the time of his passing.*
>>
>> * Broadcast Engineer in Toledo, Detroit, and
>> other employment situations including*
>>
>> * Chief Engineer of some TV stations in the
>> south. (Forgot details.)*
>>
>> ------------------------------
>>
>>
>>
>>
>>
>> *From: "Russ Miller" <wa3frp at gmail.com <wa3frp at gmail.com>>To: "Jim
>> Haynes" <jhhaynes at earthlink.net <jhhaynes at earthlink.net>>Cc: "Greenkeys"
>> <greenkeys at mailman.qth.net <greenkeys at mailman.qth.net>>, "Nick England"
>> <navy.radio at gmail.com <navy.radio at gmail.com>>Sent: Saturday, February 23,
>> 2019 2:59:36 PMSubject: Re: [GreenKeys] M28 features for RTTY operation
>> today?*
>>
>>
>> 1. *Non-Overline for the Teletype Model 28*
>>
>>
>> *On a normal Teletype machine, when someone hits CR, the carriage will
>> automatically come back but will not turn up a new line. This is a nice
>> feature for RTTY Art but a real problem if you are trying to copy a weak
>> signal and you are already receiving partially garbled text.*
>>
>>
>> *Fortunately, the Model 28 machines can be easily converted to avoid
>> overlining. This change requires no new parts and can easily converted back
>> to factory stock in a few minutes.*
>>
>>
>> *Here are the steps to make the change:*
>>
>>
>>
>> 1. *Remove the roll of paper*
>> 2. *With the motor running, look at the top of the stunt box.*
>> 3. *Hit the CR key and some slot will show activity. This should
>> be slot 5, counting from right to left as you stand in front of the
>> machine.*
>> 4. *Hit the LF key and two slots should show activity. These
>> should be slots 38 and 40, counting from right to left as you stand in
>> front of the machine.*
>> 5. *Leave slot 40 alone.*
>> 6. *Remove the LP and take out the stunt box (after disabling all
>> power).*
>> 7. *Swap the universal code bars in slots 5 and 38 and reassemble
>> the machine.*
>>
>>
>> *Now, when the CR key is pressed, nothing happens. When the LF key is
>> pressed, both CR and LF occur at the same time.*
>>
>>
>> *You will still have to hit the CR key when you are transmitting. The CR
>> character still needs to be sent to the distant machine. It may seem
>> awkward to type the CR key and have nothing happen. But, the simplicity of
>> this change, the fact that no additional parts are needed and that it works
>> so well are huge benefits.*
>>
>>
>> *I hope that this helps!*
>>
>> *Russ WA3FRP*
>>
>>
>> *On Sat, Feb 23, 2019 at 12:36 PM Jim Haynes <jhhaynes at earthlink.net
>> <jhhaynes at earthlink.net>> wrote:*
>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> *I've forgotten the details, but one of the changes was because some of
>>> Irv's enemies were starting up his machine on autostart and sending
>>> continuous LFs to run all the paper out on to the floor. Auto-CR-LF is
>>> obviously good for radio because if you miss a CR or a LF you lose a line
>>> of print. And if you get a CR without a LF you lose a line of print.
>>> (Altho there were some TTY pictures where being able to overstrike was
>>> essential) If people using computer-emulated TTY are failing to send proper
>>> end of line characters then you aren't required to be able to receive from
>>> them. An electronic regenerative repeater is always good with a mechanical
>>> Teletype because of the problem of false starts and missing stops that
>>> result in several errored characters. --- "Ya can argue all
>>> ya wanna, but it's dif'rent than it was." "No it ain't! No it
>>> ain't! But ya gotta know the territory." Meredith Willson,
>>> The Music Man *
>>
>>
>>
>>
>>
>
>
>
>
>
>
>
>
>
>
>
> * ______________________________________________________________GreenKeys
> mailing listHome: http://mailman.qth.net/mailman/listinfo/greenkeys
> <http://mailman.qth.net/mailman/listinfo/greenkeys>Help:
> http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm>Post:
> mailto:GreenKeys at mailman.qth.net <GreenKeys at mailman.qth.net>2002-to-present
> greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
> <http://mailman.qth.net/pipermail/greenkeys/>1998-to-2001 greenkeys
> archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
> <http://mailman.qth.net/archive/greenkeys/greenkeys.html>Randy Guttery's
> 2001-to-2009 GreenKeys Search Tool:
> http://comcents.com/tty/greenkeyssearch.html
> <http://comcents.com/tty/greenkeyssearch.html>This list hosted by:
> http://www.qsl.net <http://www.qsl.net>Please help support this email list:
> http://www.qsl.net/donate.html <http://www.qsl.net/donate.html>Message
> delivered to w8roi at wowway.com <w8roi at wowway.com>*
>
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net <GreenKeys at mailman.qth.net>
>
> 2002-to-present greenkeys archive:
> http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive:
> http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
> http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to steve.n4tty at gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20190225/a33f7863/attachment.html>
More information about the GreenKeys
mailing list