[GreenKeys] Removing a Model 33 from its stand?

[Tom Owad]

Thanks, Paul and Wayne.

So the panel comes off the stand, and then I find those four screws by looking upward, inside the stand? 

If for some reason I need to transport it on the stand, it will need to be lying down. Anything I should watch out for?



> On Feb 23, 2019, at 3:57 PM, WAYNE <teletypeparts at comcast.net> wrote:
> 
> Tom and Paul,
> 
> 
> 
> Paul; thanks for doing my work.  LOL. 
> 
> 
> 
> I will add a bit to help.
> 
> 
> 
> The screw to leave in while you twist the machine is the one on the left and closest to you looking from the back side.  Make sure there is a screw there before removing the other 3.  
> 
> 
> 
> Also if shipping you need 3 shipping screws to hold the printer in place.  10/32 by inch with a flat.  See pic where they go.  If you put the front one in first you can see it go in just by lifting the lid w/window.  The 33 has to be off the pedestal to install the rear ones.
> 
> 
> 
> Ship Fed Ex Ground, NEVER UPS.  Some labels might also help.  See pics.  
> 
> 
> 
> You dont need to put in shipping screws if you transport the machine in your back seat or trunk.
> 
> 
> 
> If the machine doesnt work when you get it home DO NOT take the keyboard apart.  
> 
> 
> 
> Have fun!
> 
> 
> 
> 73,
> 
> 
> 
> Wayne
> 
> KB1FDW
> 
>> On February 23, 2019 at 1:32 PM Paul Heller <paul0926 at comcast.net> wrote: 
>> 
>> It’s very easy Tom. Wayne taught me how. You need to remove the panel cover in the base to see if there is a power supply or RS-232 interface in there. If so, you disconnect it. There are four screws that hold the teletype to the base. Take three out and then twist the teletype so that it is angled on top of the base and stable. Then you take the fourth one out. That way it won’t fall off its base. Just make sure the weight is balanced as you take that last screw out.  Then just lift it off.  It’s best lifted from the back. 
>> 
>> One you have it off, don’t set it on any kind of surface you are concerned about because it will scratch the hell out of the surface. 
>> 
>> Paul
>> W2TTY
>> i-Telex: 80003 
>> 
>> ITTY:   HTTP://INTERNET-TTY.NET:8000/ITTY <http://internet-tty.net:8000/ITTY>AUTOSTART:   HTTP://INTERNET-TTY.NET:8030/AUTOSTART <http://internet-tty.net:8030/AUTOSTART> 
>> EUROPE:  HTTP://INTERNET-TTY.NET:8040/EUROPE <http://internet-tty.net:8040/EUROPE> 
>> 
>>> On Feb 23, 2019, at 11:20 AM, Tom Owad <mail at schnitz.com> wrote:
>>> 
>>> Can anybody tell me how difficult it is to remove a Model 33 from its stand? I’m looking to purchase one that’s on the second floor of a home, and the seller is a little concerned about safety (and probably about getting his walls banged up). 
>>> 
>>> Tom 
>>> ______________________________________________________________ 
>>> GreenKeys mailing list 
>>> Home: http://mailman.qth.net/mailman/listinfo/greenkeys 
>>> Help: http://mailman.qth.net/mmfaq.htm 
>>> Post: mailto:GreenKeys at mailman.qth.net 
>>> 
>>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/ 
>>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html 
>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html 
>>> 
>>> This list hosted by: http://www.qsl.net 
>>> Please help support this email list: http://www.qsl.net/donate.html 
>>> Message delivered to paul0926 at comcast.net
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
> 
>  
> 
>> ______________________________________________________________ 
>> GreenKeys mailing list 
>> Home: http://mailman.qth.net/mailman/listinfo/greenkeys 
>> Help: http://mailman.qth.net/mmfaq.htm 
>> Post: mailto:GreenKeys at mailman.qth.net 
>> 
>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/ 
>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html 
>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html 
>> 
>> This list hosted by: http://www.qsl.net 
>> Please help support this email list: http://www.qsl.net/donate.html 
>> Message delivered to teletypeparts at comcast.net
> 
>  
> 
> <Assembly after pickup.doc><Basic products used in 33 work.JPG><Pan to pedestal screw holes.JPG><Front printer shipping screw location with screw installed.JPG><Pedestal holes used for 33 mount.JPG><Teletype Equipment Warning Label.jpg><This side up.odt>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20190223/d53cbcc3/attachment.html>