[GreenKeys] FW: TT-107B parts

Duncan Brown duncanancy at earthlink.net
Wed Aug 21 13:01:23 EDT 2019


At the AWA Museum we have a TT-346A that works with the 11/16" tape.  I 
assumed it was standard, not a modification, but hard to know. It also 
has a lever to move the typewheel out so that it can type over the 
feed-holes.

The 1970 KLI Military catalog for the TT-107 -345 family (p 9-2) gives 
the following :

         "TAPE SPECIFICATIONS: Standard roll, 7/8-inch with edge
    printing, or 11/16-inch non-printing. Reperforator may be readily
    modified for center (over feed holes) printing."


The catalog page also says that only the TT-345 & -346 had the 
"Universal (7/8 in. and 11/16 in.) Tape Guide Assy."


Have fun,

Duncan
K2OEQ

On 8/21/2019 08:37, Tom Kleinschmidt via GreenKeys wrote:
>
> Kevin,
>
> I think I have a machine that contains the 11/16” conversion you are 
> looking for. I have three reperforators: TT-107 (1952) , TT-109 
> (1959), TT-345A (1961).
>
> The TT-345A has the conversion. Note in the picture; the bracket on 
> the front edge of the tape guide. There are two short shafts with 
> washers. The washers are the paper guides and offset the tape toward 
> the back of the 7/8” guide.
>
> Tom
>
> *From:* greenkeys-bounces at mailman.qth.net 
> <mailto:greenkeys-bounces at mailman.qth.net> 
> <greenkeys-bounces at mailman.qth.net 
> <mailto:greenkeys-bounces at mailman.qth.net>> *On Behalf Of *Kevin DeWitt
> *Sent:* Tuesday, August 20, 2019 1:25 PM
> *To:* Greenkeys <greenkeys at mailman.qth.net 
> <mailto:greenkeys at mailman.qth.net>>
> *Subject:* [GreenKeys] TT-107B parts
>
> All,
>
> I am searching for parts in anticipation of running my recently 
> acquired TT-107B. Documentation for the machine mentions 2 nifty 
> things I would like to locate and or know more about; the auxiliary 
> ink reservoir and the 11/16" tape adapter. I have searched TM 11-2226 
> Teletype Reperforators (May 1957) and found a picture of the ink 
> reservoir but no mention of the narrow tape adapter. A less elegant 
> solution would be to print a 7/8" strip from the reperforator and lay 
> on a punched piece of 11/16" tape and measure the difference for a set 
> of hand made shims. Here's hoping an adapter is out there in Teletype 
> Land.
>
> Kevin/ww2tty
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon>
>
> 	
>
> Virus-free. www.avast.com 
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link> 
>
>
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to duncanancy at earthlink.net



More information about the GreenKeys mailing list