[GreenKeys] ASR 33 Teletype Progress

[devin davison]

Devin here, checking back in to state my progress with the teletype i
picked up. Last i posted here i asked some basic beginner questions and
started reading over the manual. I have much more free time now and have
been looking over the ASR 33. I had tried to type things in local mode
before, however few of the keys worked. After a little digging around, i
found a screw lodged in by the H bar, where it came from in the machine i
am unsure, although it does appear to try and print the letters i type now.
I can not seem to get the machine to do a carriage return. Hitting the
return key rings the bell and the carriage kinda jumps in place, but does
not go back to the left.

My ribbon also appears to be dried up, is there a place i can get a new
ribbon?

Below is a link to a picture of the offending screw i found stuck by the H
bar.

--Devin D.​
 20170522_191937.jpg
<https://drive.google.com/file/d/0B32Dkx3hBjANSHlQeFBzaktmdlU/view?usp=drive_web>
​
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20170522/fb50506c/attachment.html>