[GreenKeys] Rigblaster and RS-232 to USB adapters

[Ralph Mowery]

At this URL you will find what you need.  

 

http://www.miklor.com/COM/UV_Drivers.php#install

 

 

 

The problem with many off the USB to 232 is windows 10 does some automatic updating and may over write your drivers and you have to reload them.  

 

If you have a true Prolific chip in the dongle converter this probably will not be a problem.

 

Even some of the other operating systems or drivers may have problems with the conversion.

 

At the same site there is another URL to look at to make your own cable from a $ 2 ebay dongle.

 

http://www.miklor.com/COM/UV_ProgrCable.php

 

73 de ku4pt

 

 

 

 

From: greenkeys-bounces at mailman.qth.net [mailto:greenkeys-bounces at mailman.qth.net] On Behalf Of Roy Morgan
Sent: Thursday, December 14, 2017 4:57 PM
To: greenkeys at mailman.qth.net
Subject: [GreenKeys] Rigblaster and RS-232 to USB adapters

 

Greenkeyers,

 

I recently got a Rigblaster digital modes adapter - it's an early one and came with an RS-232 cable to connect to a computer.

 

I expect that it will work all right if I get an adapter from USB to RS-232, but I remember folks here have gathered experience on what adapters work and what ones don't.

 

I want to use FLDIGI to operate RTTY, and some other digital modes.  (I don't have access to my REAL teletype machines for now.)

 

Is there advice or recommendations out there?

 

Thanks in advance,

 

 
-- 

Regards,

Roy

Roy Morgan

k1lky since 1958

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20171214/e79f9a56/attachment.html>