[GreenKeys] 2 1/2A SCREW IN FUSE

drlegendre . drlegendre at gmail.com
Sat Aug 12 16:39:25 EDT 2017


The easy no-solder fuse adapter requires one of those two-prong outlet
adapters, of the type which screw in to a standard lamp socket. I'm sure we
all have a few of these lying around, they were very common in the older
days.

Then you need an inline style fuseholder with wire pigtails and a 'quickie'
replacement electrical plug. Stick the wires from the fuseholder into the
replacement plug as if they were a lamp cord and then lock / snap the plug
mechanism together.

Put a 2-1/2A fuse in the holder, screw the adapter into the TTY fuse
socket, and plug-in the fuse assy. All done, no soldering - though I
suppose you could use a solder-type replacement plug, rather than the
quickie mechanical type. For additional safety, you can pull out the fuse
assy any time to provide a solid visual verification that the the AC line
is open and the unit cannot start.

On Sat, Aug 12, 2017 at 3:19 PM, Bruce Gentry <ka2ivy at verizon.net> wrote:

>     That would be a very wise move. I do wonder if a transformer that size
> would draw enough parasitic load on the primary to be a noticable waste
> when the loads are off, unless you turn the feed to the transformer off
> when you are not using the reduced voltage.
>
>      Bruce gentry, KA2IVY
>
>
> On 8/12/17 3:58 PM, Pete Lancashire wrote:
>
> In the planning for  my electrical upgrade for my 50's house, iI have
> included a small breaker panel that will fed with a 40A auto transformer
> I've had in storage for years
>
> On Sat, Aug 12, 2017 at 12:41 PM, Bruce Gentry <ka2ivy at verizon.net> wrote:
>
>> I have taken the blown fuses, torn the cap off, and used the body to make
>> an adapter for a cartridge fuse holder. If you look for the kind of fuse
>> holder with the spring in the cap so the terminals don't move when the fuse
>> is installed, you can secure it in the old fuse base with epoxy. It opens
>> up a far wider choice of fuses. Motors blowing fuses brings up another
>> concern - design voltage. If the synchronous motors are designed for 110 or
>> 115 volts at 60 cycles, the common 120-125 seen today in many places can
>> certainly cause over current and overheating. The smaller  motors in the
>> newer machines and the Mite are designed to nearly fully saturate the
>> magnetic structure in the motor, and a few volts over rating can send the
>> current very high. Even the larger motors in the model 15 and 19 can be
>> overheated to a lesser degree. The governed motors should not be affected
>> by this rise in voltage.
>>
>>      Bruce Gentry, KA2IVY
>>
>>
>> On 8/12/17 3:20 PM, drlegendre . wrote:
>>
>> I can certainly understand why one might want to have at least one
>> correct, original fuse for completeness' sake, but I can't imagine why
>> you'd want to actually +run+ these old fuses when it's so easy to adapt a
>> cheap, modern AGC-type glass cartridge fuse.
>>
>> Should something go wrong, I don't see the point in burning through
>> costly / NOS / vintage fuses.  It's also much easier to temporarily up-rate
>> the fuse for diagnostic purposes.
>>
>> On Sat, Jul 29, 2017 at 6:49 PM, < <hwhall at compuserve.com>
>> hwhall at compuserve.com> wrote:
>>
>>> I mentioned that my local surplus store has a lot of those types &
>>> offered to check the amp ratings in stock & prices. Might be able to
>>> beat the e-pay price & the $8 postage but no one asked.
>>>
>>> Wayne
>>> WB4OGM
>>>
>>> -----Original Message-----
>>> From: Thomas Tillson via GreenKeys <greenkeys at mailman.qth.net>
>>> To: greenkeys < <greenkeys at mailman.qth.net>greenkeys at mailman.qth.net>
>>> Sent: Sat, Jul 29, 2017 7:10 am
>>> Subject: [GreenKeys] 2 1/2A SCREW IN FUSE
>>>
>>> I think there was a discussion on these before and I happened to come
>>> across these on the e-pay place:
>>>
>>> http://www.ebay.com/itm/F14B-125-2-1-2A-SCREW-IN-FUSE-NEW-OL
>>> D-STOCK-1-box-of-5-PCS-/290980452933?hash=item43bfc95a45:g:Y
>>> IsAAOxyAc1SOfla&autorefresh=true
>>>
>>> No connection.
>>>
>>> Tom Tillson
>>> ______________________________________________________________
>>> GreenKeys mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:GreenKeys at mailman.qth.net <GreenKeys at mailman.qth.net?>
>>>
>>> 2002-to-present greenkeys archive: <http://mailman.qth.net/>
>>> http://mailman.qth.net/pipermail/greenkeys/
>>> 1998-to-2001 greenkeys archive: <http://mailman.qth.net/>
>>> http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
>>> http://comcents.com/tty/greenkeyssearch.html
>>>
>>> This list hosted by: <http://www.qsl.net>http://www.qsl.net
>>> Please help support this email list: <http://www.qsl.net/donate.html>
>>> http://www.qsl.net/donate.html
>>>
>>> ______________________________________________________________
>>> GreenKeys mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:GreenKeys at mailman.qth.net
>>>
>>> 2002-to-present greenkeys archive: <http://mailman.qth.net/>
>>> http://mailman.qth.net/pipermail/greenkeys/
>>> 1998-to-2001 greenkeys archive: <http://mailman.qth.net/>
>>> http://mailman.qth.net/archive/greenkeys/greenkeys.html
>>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
>>> http://comcents.com/tty/greenkeyssearch.html
>>>
>>> This list hosted by: <http://www.qsl.net>http://www.qsl.net
>>> Please help support this email list: <http://www.qsl.net/donate.html>
>>> http://www.qsl.net/donate.html
>>>
>>
>>
>>
>> ______________________________________________________________
>> GreenKeys mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:GreenKeys at mailman.qth.net <GreenKeys at mailman.qth.net>
>>
>> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
>> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
>> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>> ______________________________________________________________ GreenKeys
>> mailing list Home: http://mailman.qth.net/mailman/listinfo/greenkeys
>> Help: http://mailman.qth.net/mmfaq.htm Post: mailto:
>> GreenKeys at mailman.qth.net 2002-to-present greenkeys archive:
>> http://mailman.qth.net/pipermail/greenkeys/ 1998-to-2001
>> <http://mailman.qth.net/pipermail/greenkeys/%0A1998-to-2001> greenkeys
>> archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html Randy
>> Guttery's 2001-to-2009 GreenKeys Search Tool:
>> http://comcents.com/tty/greenkeyssearch.html This list hosted by:
>> http://www.qsl.net Please help support this email list:
>> http://www.qsl.net/donate.html
>
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> 2002-to-present greenkeys archive: http://mailman.qth.net/
> pipermail/greenkeys/
> 1998-to-2001 greenkeys archive: http://mailman.qth.net/
> archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
> http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20170812/70d3e8e4/attachment.html>


More information about the GreenKeys mailing list