[GreenKeys] Need HELP with 15RO

[John Nagle]

> From: Nick <creativegardening at hotmail.com> Subject: [GreenKeys] Need
> HELP with 15RO
>
> I loosened up the the two bolts at the bracket to move the magnets a
> hair up. Unfortunately, they slipped down and I can't find the
> correct position any more - printing garbage only and also
 > pretty fast, quite a bit faster then my good working 15KSR. But the
 > speed could be my imagination.
>
> So, here is the million dollar question : How do you usually install
> or adjust the magnets correctly ???

See the Model 15 adjustments manual:

http://www.aetherltd.com/public/model15manuals/138_Model15_Adj_Oct41.pdf

Page 15, "Magnet Bracket Adjustment", and Fig. 32.
Clearance between the magnet and armature should be 0.002" to 0.007".
This is set with a feeler gauge, which can be obtained at any
major auto parts store for about $7.

				John Nagle