[GreenKeys] M14 Tape printer cover...

[COURYHOUSE at aol.com]

KEN!   SMECC  could  use  a  3/8   discharge  chute. or  2! 
 
I  also need to  find  3/8 input  chutes  too  so if I want to run 3/8 in 
the   WU  units I  can  do so
 
thanks ed sharpe archivist  for smecc  _www.smecc.org_ 
(http://www.smecc.org)  
 
I may have a couple of the correct width (3/8") tape  discharge
chutes kicking around, but are slightly wider than the
2b  units most of you are looking for... 
Cheers! 
Ken 
VE3-HMQ
i-Telex  61663

______________________________________________________________
GreenKeys  mailing list
Home:  http://mailman.qth.net/mailman/listinfo/greenkeys
Help:  http://mailman.qth.net/mmfaq.htm
Post:  mailto:GreenKeys at mailman.qth.net

2002-to-present greenkeys archive:  
http://mailman.qth.net/pipermail/greenkeys/
1998-to-2001 greenkeys archive:  
http://mailman.qth.net/archive/greenkeys/greenkeys.html
Randy Guttery's  2001-to-2009 GreenKeys Search Tool:  
http://comcents.com/tty/greenkeyssearch.html

This list hosted by:  http://www.qsl.net
Please help support this email list:  http://www.qsl.net/donate.html
Message delivered to  couryhouse at aol.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20161103/13b9ff46/attachment.html>