[GreenKeys] model 14 and 2B questions

[COURYHOUSE at aol.com]

In a message dated 11/1/2016 9:59:28 A.M. US Mountain Standard Time,  
ddillman at igc.org writes:


Steve -  add this info  to make it clearer ..
my  14  
tape  printer  with bell label has  a  11/16  on output  
but  a 3/8 on input  it is a 14    3/8   
one...

the tape printers WU or BELL  do not  have sprocket  holes on 
the  3/8 or  wu thinner   tape.

do you have a photo of  your old   unit!?

Ed#

-----

Hi Ed.  I've attached a photo of  the 1946 KPH operating room with the unit 
in question  in the  foreground.  I've been told it's a 2B but I'm far from 
an expert.   We try to acquire equipment to stand in for items that are 
long gone.  

If the attachment doesn't work the photo may be seen  at:

http://radiomarine.org/gallery/show?keyword=kphhistory&panel=pab1_1#pab1_1

RD

=================================
Richard  Dillman
Maritime Radio Historical  Society
http://www.radiomarine.org
=================================
 

Dick I  would need a closer  photo...one thing that  the 2b dies not like 
is 3/8  tape  WU used  narrower a bit than 3/8!
 
One other thing  look inside and out  to see if  there is western union  
tags or?  not.
 
I see you also have one of the Morse  tape perforators ad  there too! Neat!
 
Ed#
 
 
 
 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20161101/f4e5d973/attachment.html>