[GreenKeys] Model 19 and 15 on 20mA loop?

[drlegendre .]

Not like I'm any expert here, but I do have a later M15 machine with the
holding type selector. My machine has a toggle switch - protected against
accidental operation by a screwed-on plate - which selects 20mA or 60mA for
the typing unit. It's the only toggle switch on the TU and it's clearly
marked.

Unless your machine has the switch, I'd think you're probably out of luck.
But if you have a 20mA converter on-hand, there's certainly no harm in
trying it out. Either it works or it doesn't..

On Tue, Apr 12, 2016 at 8:03 AM, Andy Hager <magwheels at comcast.net> wrote:

> I see here that if you have the holding type selectors the change is easy
> to make from 60mA to 20mA.
>
>
>
> But could the pulling type magnets also be used at 20mA loop current?
>
>
>
> 73
>
> Andy
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> 2002-to-present greenkeys archive:
> http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive:
> http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
> http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to drlegendre at gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20160412/9b28b50d/attachment.html>