[GreenKeys] M32/33 SMD driver power supply filter cap...

[simon]

your local electronics store? values look normal to me. expect to see a 
very small replacement size though... electrolytic caps got a whole lot 
smaller during the years since 1966. of course a working voltage of 60v 
ore more would'nt hurt. :-)

On 29-09-15 16:55, Kenneth Gartland wrote:
> Hi all...
>
> Looking to scrounge a replacement Teletype Corp'n electrolytic
> filter cap as used in the M32/33 SMD power supply...
>
> Part number is: 182501...These were used in the call control unit
> assemblies...
>
> It is a 1500MFD @ 30WVDC/45 VDC surge...
>
> Mine deteriorated so quickly, I had to take the machine out of service
> for fear of damaging the SMD driver PCB...
>
> Hopefully, one of you can come to the rescue with a replacement...
>
> Thanks to all...
>
> Cheers!
>
> Ken VE3-HMQ
> i-Telex 61663
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to info at drukknop.nl
>

-- 
Met vriendelijke Groet,

Simon Claessen
drukknop.nl