[GreenKeys] Teletype Model 14, ASR 32, and Chadless Perforating

[Ed Sharpe Archivist for SMECC via GreenKeys]

Wayne - opps   it  does say chadless...   I  missed  that..  hmmm.... I did 
not   think of    if  32  reads that or  not?    Not   sure.....
 
Jim H?  a  ruling on thisQ?Q? 
 
Ed#   _www.smecc.org_ (http://www.smecc.org)  
 
In a message dated 9/19/2015 4:07:50 P.M. US Mountain Standard Time,  
teletypeparts at comcast.net writes:

 
Whoops, Ed says the chadless tape will work on 32's, but I thot I heard a  
while back that they wouldn't.  You can always try, but if it doesn't  work, 
don't be surprised.


Wayne


 
____________________________________
From:  "Ed Sharpe Archivist for SMECC via GreenKeys"  
<greenkeys at mailman.qth.net>
To: pbirkel at gmail.com,  GreenKeys at mailman.qth.net
Sent: Saturday, September 19, 2015 4:09:39  PM
Subject: Re: [GreenKeys] Teletype Model 14, ASR 32, and Chadless  
Perforating


yes!   32 reads 14 tapes well!
Ed# _www.smecc.org_ (http://www.smecc.org/) 
 
 
In a message dated 9/19/2015 12:38:31 P.M. US Mountain Standard Time,  
pbirkel at gmail.com writes:

 
I'm new to the field; _very_ new.  I've been following matters  here for a 
number of months, in large part because I found myself in the  possession of 
a restorable Model 14 Receiving-only (Low Base) Typing  Reperforator.  
Outside is a little beat up, but the insides have been  kept well lubricated and 
mostly seems to be suffering from a moderate amount  of congealed grease.  
The internal sound-deadening foam is actually  intact (which surprises me, 
but maybe not you all).


The "Aetheric Message Machine Company" has a bounty of Model 14  manuals 
online (thank you!) from which I was able to identify my possession,  and 
learn about chadless perforating ... and why one would want to do such a  thing 
:->!


I also received an ASR-32 which was stated to be working "last  year", and 
although 5-level code is not what I grew up with (I'm an ASR-33  baby I 
guess ...), it seems to me that the ASR-32 ought to be able to read  the 
M14-produced tape, because of its pin-based reader.  Do I have that  correct?


And one other question:  The left edge of the base has a  cutout, behind 
which is a pre-wired cable harness that has been neatly taped  and tied off.  
My best guess is that a transmitter-distributer might  have attached there, 
but I can't find any reference to such a  configuration.  Does anyone know 
what purpose was served  there?


Any warnings that you'd care to toss-my-way will be heeded  :->.


Good health,


paul




______________________________________________________________
GreenKeys  mailing list
Home:  http://mailman.qth.net/mailman/listinfo/greenkeys
Help:  http://mailman.qth.net/mmfaq.htm
Post:  mailto:GreenKeys at mailman.qth.net


2002-to-present greenkeys archive:  
http://mailman.qth.net/pipermail/greenkeys/
1998-to-2001 greenkeys  archive: 
http://mailman.qth.net/archive/greenkeys/greenkeys.html
Randy  Guttery's 2001-to-2009 GreenKeys Search Tool:  
http://comcents.com/tty/greenkeyssearch.html


This list hosted by: http://www.qsl.net
Please help  support this email list:  http://www.qsl.net/donate.html


______________________________________________________________
GreenKeys  mailing list
Home:  http://mailman.qth.net/mailman/listinfo/greenkeys
Help:  http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net


2002-to-present greenkeys archive:  
http://mailman.qth.net/pipermail/greenkeys/
1998-to-2001 greenkeys archive:  
http://mailman.qth.net/archive/greenkeys/greenkeys.html
Randy Guttery's  2001-to-2009 GreenKeys Search Tool:  
http://comcents.com/tty/greenkeyssearch.html


This list hosted by: http://www.qsl.net
Please help support  this email list: http://www.qsl.net/donate.html




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20150919/03669c11/attachment.html>