[GreenKeys] 33-ASR Paper Tapee Punch Faults

[Pete Lancashire]

Has it ever punched correctly ?

Manually cycle by turning the motor by hand, set up for all make, trip the
clutch and watch the punch.

-pete

On Sun, Sep 6, 2015 at 8:00 PM, Rick Bensene <rickb at bensene.com> wrote:

> The 2^2 and 2^5 bits on the paper tape punch on my 33-ASR don't punch.
> When I punch a RUBOUT, these bits don't punch.  The behavior is consistent
> when punching any character.
>
> Any ideas as to what to check for?  The unit properly sends and receives
> data via 20ma Current Loop, and printer properly echoes characters from
> keyboard in local mode, so I suspect the issue is in the punch itself.
>
> Thanks,
> -Rick
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> 2002-to-present greenkeys archive:
> http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive:
> http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
> http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20150908/d04f0fe2/attachment.html>