[GreenKeys] Mite XE-1

[Ed Sharpe Archivist for SMECC via GreenKeys]

if it says 400 h  use ONLY 400 hz  or u will smoke  it!!!!!!!
\
 
Ed#
 
 
 
 
 
In a message dated 5/17/2015 5:12:54 P.M. US Mountain Standard Time,  
coryheisterkamp at gmail.com writes:

Hi  Guys,

Well, it was quite the weekend in Ohio. Didn't find a whole lot  at the 
Dayton Hamfest, but I did make good on picking up a number of teletypes  up 
towards Toledo which ended up making the trip worthwhile. Still lots of  
unloading to do, but the big surprise was a Mite XE-1 setup complete with  reperf. 
Now, this is new territory for me, having stuck with 28's and 32/33's  in 
the past, but it's all there and in great shape so it shouldn't take a lot  
to get it going. Now, there is a cordset to take the 14 pin connector to a 
std  120V AC outlet, but the top of this unit reads 400 CPS (115V), and I note 
a  small internal card-cage with some sort of electronics that may or may 
not  take kindly to 60Hz. I'm assuming then that I'll need a 400Hz source not 
to  damage anything? What do the experts recommend in this  situation?

Thanks guys,
Cory  
______________________________________________________________
GreenKeys  mailing list
Home:  http://mailman.qth.net/mailman/listinfo/greenkeys
Help:  http://mailman.qth.net/mmfaq.htm
Post:  mailto:GreenKeys at mailman.qth.net

2002-to-present greenkeys archive:  http://mailman.qth.net/pipe
rmail/greenkeys/
1998-to-2001 greenkeys archive:  
http://mailman.qth.net/archive/greenkeys/greenkeys.html
Randy Guttery's  2001-to-2009 GreenKeys Search Tool:  
http://comcents.com/tty/greenkeyssearch.html

This list hosted by:  http://www.qsl.net
Please help support this email list:  http://www.qsl.net/donate.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20150517/3f781288/attachment.html>