[GreenKeys] LF Upstop block M32/33...

[Kenneth Gartland]

Hi all...

Referring to my previous msg re: the M32/33 LF upstop block as a possible
replacement for the M28LPR print hammer head...

I can't. provide a part number for this, as my parts manuals are way out of
date,
I have Bulletin 1184-B, and 1210-B, (1971 & 1972) and it is in neither of
them...

Perhaps our good friend and M32/33 man, Wayne, cud weigh in on this issue...

The plastic/nylon block was used in middle production years, and is the
"Small"
variety...

In later/last production models, the block is considerably larger and is
used with
the improved yield spring LF linkage & upstop bracket...

Both blocks have a small rectangular hole to fit on the bracket...I believe
the
smaller one mite work...Like the original M28LPR print hammer, it is quite
narrow,
with the mounting hole being off-set...

Hope we can use this idea...

Note to Nick...Hope this answers your question...

Cheers!

Ken VE3-HMQ
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20150216/b14d1198/attachment.html>