[GreenKeys] Changing speeds on a Lorenz Lo-15b

[Jeffrey D Angus]

On 12/12/2015 2:43 PM, Duncan Brown wrote:
> I forgot to add - you can probably find a spot on the Range Finder that
> will copy fine for both 45 & 50 baud. Then you have an _automatic_,
> _adaptive_ machine that will copy both 45 & 50 baud with no speed
> selection needed!!
Or I could set the machine speed to 63 WPM and be wrong at both
speeds.
The whole point here is that the i-Telex guys are mostly running 50
Baud, and most RTTY operation is at 45.45 Baud.
Determining correct motor speed and controlling isn't that big a deal.

I did the math for the phase locked loop, and in an 18 bit binary word
for the divider, I only have to change a single bit for the two different
speeds.

This way, I can be right for both speeds.


-- 
Jeff-1.0
wa6fwi
http://www.foxsmercantile.com