[GreenKeys] [FWD: Model 28/35 Perforator and Reperforator Hammer Heads]

[Bob Rosenbloom]

I have three M35's so could use at least three of them.

Bob

On 12/4/2015 12:15 PM, Gil Smith wrote:
> Forwarding this for George...
>
> gil smith, AF7EZ
> greenkeys moderator
> gil at baudot.net <mailto:gil at baudot.net>
>
>
> -------- Original Message --------
>
>
>     All - - -
>
>     Today I authorized the fabrication of a mold for the production of
>     the
>     print hammer heads for the model 28 and 35 typing perforator and
>     reperforators.
>
>     It will be possible to produce twelve pieces per batch.
>
>     The process entails use of a cast elastomer.
>
>     Cost is yet to be determined, and will probably be quite reasonable.
>
>     More later as details are developed.
>
>     Merry Christmas...
>
>     W7TTY
>
>
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to bobalan at sbcglobal.net


-- 
Vintage computers and electronics
www.dvq.com
www.tekmuseum.com
www.decmuseum.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20151204/d182e961/attachment.html>