[GreenKeys] KSR33 fixed! Problem and Solution notes

[teletypeparts at comcast.net]

PJ, 
  
Good explanation on GK.  Once again, most issues fixed by VISUAL INSPECTION.  All but one I guess.  Here is the pic of the 1/3 clothespin in the armature if any GK 33 guys want to use it sometime.  It goes in hugging the side frame and closes the armature manually to test the printer stopping all 3 clutches mechanically.  Doesn't do the distributor clutch.  
  
Your vinyl hammers and green resistor went out today.  If you don't need the green resistor, could you please return it.  They rarely fail, but the ones I have seem to have a quality control issue.  If you still need it then use it of course.  
  
Wayne 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20150825/79b244fa/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Selector area with wedge.JPG
Type: image/jpeg
Size: 418702 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20150825/79b244fa/attachment-0001.jpe>