[GreenKeys] Square legs on Teletype 15 & 19 tables need inerts to put cas...

[COURYHOUSE at aol.com]

JEFF  you hit  it!  Now,  I just have to yank one out and  flip it   to 
measure the   tubing size  ( hard in close quarters they are  displayed in)  
does anyone have   tubing dimensions for  the  metal 15 or 19 tables?
 
I had checked the Granger site  and either did not use the right keyword or 
they do not have  any.
 

But now ... the heavy duty ones or  the light duty ones?


the first ones here are rated at  over 1000 lbs per leg.


 
Install these inserts and you'll be able to use threaded leveling mounts on 
your tube-end  machinery supports, instrument bases, and conveyor 
equipment. Inserts  are plastic with brass threads and tap into place with a rubber 
hammer. 
Inch inserts have a  temperature range of 20° to 180°  F. Metric inserts 
have a temperature  range of -20° to 180° F.
then there is also......but no  weight rating... but cheap.
 
 
Light Duty Threaded Tube Inserts

 
 
 
 
 
 




 
 






 
 
Slip these inserts in square tube ends to provide a thread  for leveling 
mounts in your light equipment and furniture. Inserts have four flexible 
spring steel walls that  grip the inside of tubing. Base is zinc-plated steel. 
Not rated for capacity.




 
 
In a message dated 1/9/2014 8:48:47 A.M. Mountain Standard Time,  
jdangus at att.net writes:

McMaster  Carr:
The inserts for the square  legs.
<http://www.mcmaster.com/#leveling-glide-adapters/=q6dett>
and  the threaded casters for the  inserts.
<http://www.mcmaster.com/#standard-casters/=q6deyk>

Jeff-1.0
wa6fwi

______________________________________________________________


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20140109/7cae6ab1/attachment.html>