[GreenKeys] moving a 28 ASR...

[COURYHOUSE at aol.com]

Yea I think I would pass on lifting it OVER  the  railing! 
 
I have never pulled the  keyboard  platform  from the   ASR  so will let   
other  comment on  tips on   doing it. I think you are on the  right  track  
though
 
Ed# KF7RWW
 
 
In a message dated 2/10/2014 7:04:08 P.M. US Mountain Standard Time,  
w2hx at w2hx.com writes:

You  are correct. I have to get around a stairway. I will have to either 
lift it  above the railing or put it on its end and wheel around it. Yes, I 
will use a  harbor freight dolly. 

73 Eugene W2HX

-----Original Message----- 
From:  COURYHOUSE at aol.com [COURYHOUSE at aol.com]
Received: Monday, 10 Feb  2014, 7:49pm
To: W2HX [w2hx at w2hx.com]; greenkeys at mailman.qth.net  
[greenkeys at mailman.qth.net]
Subject: Re: [GreenKeys] moving a 28  ASR...


Eugene - how about  putting wheels under it?  or  is there  an area  that   
you can not make a turn?
 
We have  crammed  2  ASRs into the museum and   used   7.95  harbor freight 
 flat dolly at each end.
 
Just have a friend  to help lift  and slide dolly  under  each  end
 
Even smaller  footprint is  to  put casters on it.
 
 
Ed Sharpe Archivist  for  SMECC _www.smecc.org_ (http://www.smecc.org/)  
 
 
 
 
In a message dated 2/10/2014 5:30:15 P.M. US Mountain Standard Time,  
w2hx at w2hx.com writes:

 
Hello all,  
I am moving into a new shack in the house. I have moved  the KSR by brute 
force. Now it is time for the ASR which will need some  dismantling.  It has 
been several years since I took this apart to move  it into its current 
location. 
I have removed the metal guard above the keyboard. I  think I will have to 
remove the page printer and the keyboard.  Looking  around it seems there is 
a large bed plate that holds the printer as well as  the perforator. (no 
under dome reperf on this one).  Do I take this  whole bed out? Do I leave the 
printer and perf attached to the bed as I  remove it? What about the 
keyboard? Is that integral to the printer or does  it come out separately from the 
printer? 
The objective is to reduce the weight of this thing so I  can maneuver it 
around. Most likely I will have to put it on its side on a  moving dolly. 
Thanks in advance 
73 Eugene W2HX 

=

______________________________________________________________
GreenKeys  mailing list
Home:  http://mailman.qth.net/mailman/listinfo/greenkeys
Help:  http://mailman.qth.net/mmfaq.htm
Post:  mailto:GreenKeys at mailman.qth.net

2002-to-present greenkeys archive:  
http://mailman.qth.net/pipermail/greenkeys/
1998-to-2001 greenkeys  archive: 
http://mailman.qth.net/archive/greenkeys/greenkeys.html
Randy  Guttery's 2001-to-2009 GreenKeys Search Tool:  
http://comcents.com/tty/greenkeyssearch.html

This list hosted by:  http://www.qsl.net
Please help support this email list:  http://www.qsl.net/donate.html



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20140210/cb6c7224/attachment.html>