[GreenKeys] Casters for M28 Teletype equipment

[Jack Hart]

When I had my shack in a room with hardwood floors,

I put a short piece of carpeting under the TTY's.  Or, use

the interlocking rubber mats sold at Home Depot, etc.

 

I'm not sure why anyone would want wheels unless

the machines are going to be moved all of the time. Wheels

will definitely transmit noise and vibration.

 

Jack K0TTY

 

NNNN

 

 

 

 

From: greenkeys-bounces at mailman.qth.net
[mailto:greenkeys-bounces at mailman.qth.net] On Behalf Of Jim Plummer
Sent: Saturday, February 1, 2014 7:22 PM
To: Paul Heller; W2HX
Cc: greenkeys at mailman.qth.net; Jim Haynes
Subject: Re: [GreenKeys] Casters for M28 Teletype equipment

 

My wife picked up some glides at the local home improvement store to place
under some of our larger furniture.  They allow the furniture to slide
around on the hard work floor with not damage to the floor.  They come in a
variety of sizes.  For hard word there is a fiber glide.  For carpet there
is a nylon glide.  It might work for your 28.

 

de Jim - K8ARY 

 

 

On Saturday, February 1, 2014 7:15 PM, Paul Heller <paul0926 at comcast.net>
wrote:

I order one set of 2 inch and one set of 3 inch.  I think the two inch
visually look better on the cabinet (the 3 inch look too large IMHO) but I
prefer the way it moves around with the 3 inch. 

The wear pattern is interesting. The 2 inch has wear all the way across and
uses the entire width of the wheel (the wheel is flat across), while the
three inch has a 1/4 inch strip so it is only using a portion of the wheel
(the wheel is slightly v shaped).

Not sure which would be better for wood flors.

Paul

On Feb 1, 2014, at 3:30 PM, W2HX <w2hx at w2hx.com> wrote:

> Hi all. I am finally getting my new shack together and it is time to
purchase casters for my M28 KSR and ASR.  What did you guys end up buying? I
think I read that some of you bought the 2" size with no brake.  I am
looking at these two currently:
> 
> http://www.grainger.com/product/Swivel-Stem-Caster-3A711?searchQuery=3A711
> http://www.grainger.com/product/Swivel-Stem-Caster-3A731?opr=APPD
<http://www.grainger.com/product/Swivel-Stem-Caster-3A731?opr=APPD&pbi=3A711
> &pbi=3A711
> 
> The difference seems to be rubber vs. polyolefin.  My new shack has
hardwood floors that I would prefer to avoid marring if possible which of
these would be better for the floor? Any opinions? 
> Is 2" wheel big enough? Did anyone get bigger?
> 
> Thanks!
> Eugene
> 
> 
> -----Original Message-----
> From: greenkeys-bounces at mailman.qth.net
[mailto:greenkeys-bounces at mailman.qth.net] On Behalf Of Jim Haynes
> Sent: Wednesday, October 02, 2013 4:02 PM
> To: greenkeys at mailman.qth.net
> Subject: [GreenKeys] Casters for M28 Teletype equipment
> 
> I just discovered that W.W. Grainger is closing out a bunch of suitable
casters (threaded stem casters with 1/2x13 thread) that will screw into
> M28 equipment in place of the adjustable feet.  Prices are less than $5
each.  Some suitable part numbers I found are 3A711, 1ZNK5, 3A732.
> (Look in their online catalog to see what you get for those numbers) There
may be others too, I didn't look at everything in the catalog.
> 
> jhhaynes at earthlink dot net
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
> 2002-to-present greenkeys archive:
http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive:
http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net/
> Please help support this email list: http://www.qsl.net/donate.html


> 
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
> 2002-to-present greenkeys archive:
http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive:
http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
http://comcents.com/tty/greenkeyssearch.html
> 
> This list hosted by: http://www.qsl.net/
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net

2002-to-present greenkeys archive:
http://mailman.qth.net/pipermail/greenkeys/
1998-to-2001 greenkeys archive:
http://mailman.qth.net/archive/greenkeys/greenkeys.html
Randy Guttery's 2001-to-2009 GreenKeys Search Tool:
http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net/
Please help support this email list: http://www.qsl.net/donate.html

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20140201/e784c565/attachment.html>