[GreenKeys] Real Teletype RTTY

[tony.podrasky]

GM OMs;

Wayne - that should be easy to fix: there is a timing circuit that
controls when the ST-5000 is satisfied that there is a valid
signal and starts keying the loop.

The ST-6 has a fast and slow switch. I left the FAST timing circuit
alone and increased the delay of the SLOW to about 3 seconds.

Take a look at the schematic. If you're not sure which resistor
to change, post a copy of it on here and I'm sure someone will be
able to tell you which one it is.

UE,
K2EAA - TONY
NNNN
ZCZC

On 08/08/2014 07:53 AM, Teletypeparts via GreenKeys wrote:
>
> The biggest problem I have is my Hal ST-5000 has a 3 or 4 second delay
> before it recognizes the receive RTTY signal and starts printing.
> 73,
> Wayne
> KB1FDW
>
>
>
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> 2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
> 1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
> Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

-- 
Back in my day we didn't have virtual reality or
video games. If an axe-wielding one-eyed razorback
barbarian warrior was chasing after you, you just
had to hope you could outrun him.