[GreenKeys] Model 33 Rubber Hammer

[Teletypeparts]

While you all are waiting I would use the tubing.  Any existing rubber hammers are either hard or mushy.  

Wayne




-----Original Message-----
From: Seth Morabito <lists at loomcom.com>
To: greenkeys <greenkeys at mailman.qth.net>
Sent: Mon, Sep 30, 2013 2:35 pm
Subject: Re: [GreenKeys] Model 33 Rubber Hammer


* On Mon, Sep 30, 2013 at 06:55:35PM +0100, Jarratt RMA <robert.jarratt at ntlworld.com> 
rote:
 Sounds like there is a plan to see if more rubber hammer heads can be made.
 If enough people contribute we could share the cost of having the mould
 made, I'd be prepared to contribute if the cost is not too outrageous.
I'd be happy to contribute, as well.
I don't have much experience with manufacturing, but I assume set-up
osts will be expensive. Individual unit cost after that should be
retty low.
If someone with manufacturing contacts can look at costs for the group,
aybe we'd have a better idea what kind of money we'd need to come up
ith.
-Seth
_____________________________________________________________
reenKeys mailing list
ome: http://mailman.qth.net/mailman/listinfo/greenkeys
elp: http://mailman.qth.net/mmfaq.htm
ost: mailto:GreenKeys at mailman.qth.net
2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
andy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html
This list hosted by: http://www.qsl.net
lease help support this email list: http://www.qsl.net/donate.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20130930/cbd2b728/attachment.html>