[GreenKeys] 14TD with chadless tape

[COURYHOUSE at aol.com]

it's all good  stuff!
 
and... I   know enough  when I look  at  my   stack of these   to but  my  
19 together I will be   forearmed  with  what I am looking  for   yea   
thanks  to all  that  replied!
 
 
 
 
 
In a message dated 3/10/2013 10:39:59 P.M. Mountain Standard Time,  
epvgk at limpoc.com writes:

Well  that was quite the outpouring of help! As it turns out, it looks like 
 the
feed roller was slightly misaligned, causing the feeler pins to come up  
right at
the very edge of the tape holes and sometimes catch on the edge of  a hole. 
For reference, the adjustment is described on the 141B PDF pg 26  (page 
2-17, 
paragraph 32) and just involves repositioning the detent  roller bracket a 
tiny
bit. It looked like someone had pushed it off to one  extreme of its range, 
but
after adjusting, the feeler pins always hit  within the holes and I'm 
getting 
100% error-free reads.. whee! Thanks for  all the helpful advice!  

eric
______________________________________________________________
GreenKeys  mailing list
Home:  http://mailman.qth.net/mailman/listinfo/greenkeys
Help:  http://mailman.qth.net/mmfaq.htm
Post:  mailto:GreenKeys at mailman.qth.net

This list hosted by:  http://www.qsl.net
Please help support this email list:  http://www.qsl.net/donate.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20130311/1eba26a1/attachment.html>