[GreenKeys] Current Loop Connector

[Rob Jarratt]

I had already downloaded the manual. The thing is that there are no screws,
there is a socket into which some kind of connector has to be inserted.
Perhaps I am missing a part?

 

Regards

 

Rob

 

From: greenkeys-bounces at mailman.qth.net
[mailto:greenkeys-bounces at mailman.qth.net] On Behalf Of Jeffrey D Angus
Sent: 02 February 2013 09:45
To: greenkeys at mailman.qth.net
Subject: Re: [GreenKeys] Current Loop Connector

 

On 2/2/2013 2:04 AM, Rob Jarratt wrote:

I just got a Westermo MA-21 to convert RS-232 to current loop.
The connection to the current loop side is described as a "5-position
screw-terminal". Is there some kind of standard connector that I
should be looking for because searching for "5-position screw
terminal" does not show up anything useful?

Download the manual.
 <http://www.westermosales.com/pdfs/MA-21manualENGSEDE.pdf>
<http://www.westermosales.com/pdfs/MA-21manualENGSEDE.pdf>

"5-position screw terminal" is just that. 5 separate screws on the
back to connect the transmit, receive and shield wires from the
MA-21 to the teletype machine.

Jeff

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20130202/71d28e1a/attachment.html>