[GreenKeys] Thanks

[Norm]

I want to thank all of you, who responded to my needing a wiring sheet for M15 and ground fault problem.  I will now be throwing out more questions down the line as I  experiment with both units.

Norm
WB7WEQ
  ----- Original Message ----- 
  From: Norm 
  To: greenkeys at mailman.qth.net 
  Sent: Saturday, August 03, 2013 11:21 AM
  Subject: Need wiring sheet of a WU M15TTY Base 


  Hi
  I am in need of  a wiring sheet of a WU M15 base I think the base number is 192462, that number is on a tag on the left side of the base , and also would like a Parts book or PDF of one.  My problem is if I plug the unit in to a "ground fault outlet it will pop the device.  There is a  Western Electric square metal box mounted on the right side of the base right above the 26 terminal block.  The square metal unit has two capacitors with a ground connection, the two caps four wires are wire thru each side of the AC cord to the motor.

  I do have a high resistance to ground with each capacitor.  I put a current meter on the wires, and it looked like a 3.3 amp spike then right down to 2 amps plug in to normal outlet, I think the spike is popping the "ground fault outlet or the Capacitors are going bad.

  Has anybody ever had this experience with a ground fault outlet? 

  Another little side note is, I can plug a M14 TD in the ground fault outlet and it works.

  I would appreciate any help on this.

  Norm
  WB7WEQ
         
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20130807/e43f974e/attachment.html>