[GreenKeys] Small Grease Gun?

[Rokumon Cat]

Have you tried a needle zerk fitting? They do not fit over the zerk, but rather push the little ball into the fitting and then the grease will flow under great pressure. That is what I used to have to use when I was a kid to grease the U-joint in the driveshaft of my old cars before the days of sealed joints.
 
Best,
 
Joe

--- On Mon, 4/22/13, Brooke Clarke <brooke at pacific.net> wrote:


From: Brooke Clarke <brooke at pacific.net>
Subject: [GreenKeys] Small Grease Gun?
To: greenkeys at mailman.qth.net
Date: Monday, April 22, 2013, 11:29 AM


Hi:

The Tape-Ard paper punch needs cleaning & lubrication and there's one Zerk grease fitting on the main shaft which has the sticky problem
Does someone have a small grease gun with appropriate grease?  See Fig 2
http://www.prc68.com/I/Tape-ARD173A.html

-- Have Fun,

Brooke Clarke
http://www.PRC68.com
http://www.end2partygovernment.com/2012Issues.html

______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net

2002-to-present greenkeys archive: http://mailman.qth.net/pipermail/greenkeys/
1998-to-2001 greenkeys archive: http://mailman.qth.net/archive/greenkeys/greenkeys.html
Randy Guttery's 2001-to-2009 GreenKeys Search Tool: http://comcents.com/tty/greenkeyssearch.html

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/greenkeys/attachments/20130426/acf4e640/attachment.html>