[GreenKeys] Automatic Carriage Return Line Feed for Model 15 & Model 19 Printers

[Wa3frp]

I was able to locate the article from RTTY Journal.  I will email you a scan of this article from July - August 1968 RTTY Journal.  I was happily surprised that the article was written by Irv Hoff W6FFC.

If anyone else needs this article, please send me an email and I'll send it along. 

Also, I have a couple of other documents that may be of interest.  These are for Model 28 machines and deal with 
non-overline, automatic carriage return & line feed and unshift on space.

73 es DX
Russ - WA3FRP
wa3frp at aol.com




-----Original Message-----
From: COURYHOUSE <COURYHOUSE at aol.com>
To: wa3frp <wa3frp at aol.com>; greenkeys <greenkeys at mailman.qth.net>
Sent: Sat, Jan 28, 2012 8:57 pm
Subject: Re: [GreenKeys] percentage of machines running vs use of electronics to view ...



many thanks ! Russ!  
 
Seems like ti   would save a lot of heartache and a pit in one end of the  carriage rubber too!  
 
 
Ed#  www.smecc.org
In a message dated 1/28/2012 6:48:29 P.M. US Mountain Standard Time, wa3frp at aol.com writes:

Ed, 
 
I remember seeing a model 15 mod for auto cr/lf that was published in RTTY Journal in the late '60 or early '70.  
 
Let me see if I can locate it.

73
Russ - WA3FRP
wa3frp at aol.com




-----Original Message-----
From: COURYHOUSE <COURYHOUSE at aol.com>
To: wa3frp <wa3frp at aol.com>; greenkeys <greenkeys at mailman.qth.net>
Sent: Sat, Jan 28, 2012 11:56 am
Subject: Re: [GreenKeys] percentage of machines running vs use of electronics to view ...



This is  good to know there is an auto cr/lf  for the 28... probably not  for the   15 though...
 
Now that I finally have a license I will have to figure a way to get on the  air... but...  want to try to  do it  with the old iron!
 
Ed!




 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/greenkeys/attachments/20120130/ae241c9d/attachment.html