[GreenKeys] Fw: [Bulk] Re: Acoustic Coupler

[Paul A. Pennington]

DAA stands for Digital Access Arrangement.  It's the interface from your acoustic coupler to the phone line.  Used to be provided by the phone co. for big bucks.  Someone here can probably tell you how to simulate one and what the connector pinout is.

Paul Pennington
Augusta, Georgia

  ----- Original Message ----- 
  From: Larry Tighe 
  To: Greenkeys Greenkeys 
  Sent: Sunday, October 16, 2011 5:20 PM
  Subject: [GreenKeys] Fw: [Bulk] Re: Acoustic Coupler



  ----- Original Message ----- 
  From: "Larry Tighe" <larryradio at att.net>
  To: <gfmurphy at earthlink.net>
  Sent: Sunday, October 16, 2011 5:19 PM
  Subject: Re: [Bulk] Re: [GreenKeys] Acoustic Coupler


  > HI Jerry,
  >
  > I screwed up calling it a telex...it's a TWX.  It's a Model 33ASR running 
  > at 20 ma.
  >
  > The loop keying device that should be with the AJ was not there so I'm 
  > using a Black Box CL-51A.  That box has RS 232 in and out to key the loop 
  > and when the KB keys the loop, it comes out of the Black Box as RS 232.
  >
  > Problem seems to be that the AJ acoustic coupler has a Molex connector 
  > labeled DAA.  Nothing came with the machine to go into that.  There are 
  > only 4 pins active on that Molex but, so far, I don't know what they're 
  > for.
  >
  > I'm using a 181720 power supply that gives me 80 volts at 20 ma.  for the 
  > Black Box to key for loop....works fine.
  >
  > So, I think the problems are narrowed down to DAA.
  >
  > lar

  ______________________________________________________________
  GreenKeys mailing list
  Home: http://mailman.qth.net/mailman/listinfo/greenkeys
  Help: http://mailman.qth.net/mmfaq.htm
  Post: mailto:GreenKeys at mailman.qth.net

  This list hosted by: http://www.qsl.net
  Please help support this email list: http://www.qsl.net/donate.html