[GreenKeys] problems with 28ASR reperf connections

[zeke440 .]

Tim
 
try this link for the Mod 28asr diagram.
 
http://www.navy-radio.com/manuals/tty/28ASR_wiring_W0700.pdf
 
There may be a better "view" of the diagrams somewhere but it is all here

Andy 



> Date: Tue, 29 Nov 2011 16:34:36 -0800
> From: tpk at sonic.net
> To: greenkeys at mailman.qth.net
> Subject: [GreenKeys] problems with 28ASR reperf connections
> 
> I got a AN/UCG-15 aka 28ASR that I'm in the process of restoring and I 
> have the typing unit working great, but I can't figure out where the 
> typing reperf wires in. I have some BSP's and prints, but none show 
> exactly where to tie in the reperf. I want to have it use the K-T 
> selector switch like it should. I did test it by putting the magnets in 
> series with the line and it worked OK. Problem is, is that it runs all 
> the time. If anybody can give me some info where to wire this unit, I 
> would be appreciative. Been banging on this project for weeks now.
> It's a TT-373/UG which I think equates to an LPR51 teletype unit.
> 
> Thanks
> -tim
> tpk at sonic.net
> -- 
> 24 hours in a day, 24 beers in a case...coincidence?
> A bartender is just a pharmacist with a limited inventory!
> ----------------------------------------------------------
> T.P. (Tim) Kirkpatrick [K6TPK]
> Email: tpk at sonic.net
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html