[GreenKeys] ITTY ...

[wb0cte at netscape.net]

Also, you will see the button with "Rev" on it? Click on it as you may be receiving now upside down so to speak.? Both my Dell and HP computers automaticaly print out on MTTY when copying ITTY. Sometimes you can jump your sound output to your sound input on your computer to make it print.
?
Wayne? wb0cte




-----Original Message-----
From: Duncan Brown <duncanancy at earthlink.net>
To: greenkeys <greenkeys at mailman.qth.net>
Sent: Mon, Jan 31, 2011 9:03 pm
Subject: Re: [GreenKeys] ITTY ...




John, 
 
MMTTY has a lot of options and can be difficult to run if everything is  
not set up properly. 
Some questions & suggestions: 
 
Have you successfully run MMTTY with any input other than ITTY? 
 
Do you see any audio indication on the MMTTY screen? (the horizontal bar  
in the center will show green with sufficient audio. In the "View"  
drop-down menu, select "FFT Display" for a spectrum view and "XYScope"  
for a cross-type tunning display if those are not already shown on the  
right side of the screen.) 
 
Press the "HAM" button for the 170Hz shift default. 
 
If you can hear the ITTY tones in your computer speaker, you should see  
two peaks on the spectrum display and a cross or two ellipses at right  
angles on the scope display. 
 
If you get nothing on the spectrum display and just noise on the scope  
display, click the "RY" button to see what it should look like. (Click  
"TXOFF" to turn off the RY test.) 
 
In the "Option" drop-down menu, you can make adjustments to your sound  
card levels. 
 
If your computer has a built-in microphone, make sure it is OFF (or it  
will send the audio from your speakers back into MMTTY and screw things up. 
 
I have a 1.2 MB pdf file of a MMTTY "manual" which I can send you if you  
like. 
 
Hope this helps, 
 
Duncan 
K2OEQ 
 
 
On 30-Jan-11 17:04, John Schroeder wrote: 
> Hello Group: 
>    
> Just downloaded ITTY... Already had MMTTY... Question is, All I get is  
jibberish... Wondering if someone can point me in the right direction on how to  
set MMTTY up correctly... Am THIS close! 
>    
> Tnx 73 ... John ... KB9PBM ... 
> 
> 
> 
> 
______________________________________________________________ 
GreenKeys mailing list 
Home: http://mailman.qth.net/mailman/listinfo/greenkeys 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:GreenKeys at mailman.qth.net 
 
This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html