[GreenKeys] Wanted: Model 33 teletype front plate

[Teletypeparts]

Richard,

I have a couple.  They are hard to find in good condition.  The ones I have left, someone has drilled holes in the ends that match up with the two outer plastic cover holes.  I guess they planned to make sure the front plate never fell off (as they are sometimes prone to do) by modifying the front plate this way.  

So if, you are not fussy, I can get one to you, but if you want a pristine one, they are difficult to find.  

Also, shipping is not fun as they dont fit any box well.  You have to tape the plate to a piece of wood to make sure they dont get damaged in shipment.

Wayne



-----Original Message-----
From: Richard <legalize at xmission.com>
To: Green Keys <greenkeys at mailman.qth.net>
Sent: Fri, Dec 9, 2011 12:03 pm
Subject: [GreenKeys] Wanted: Model 33 teletype front plate



'm looking for the front metal plate for a model 33 teletype, used
r NOS.
Any suggestions where one can be found?
You can see my teletype here, 2nd shelving unit from the right.
http://manx.classiccmp.org/collections/cgm/sprawl2/dsc_0562.jpg>
- 
The Direct3D Graphics Pipeline" -- DirectX 9 version available for download
<http://legalizeadulthood.wordpress.com/the-direct3d-graphics-pipeline/>
      Legalize Adulthood! <http://legalizeadulthood.wordpress.com>
_____________________________________________________________
reenKeys mailing list
ome: http://mailman.qth.net/mailman/listinfo/greenkeys
elp: http://mailman.qth.net/mmfaq.htm
ost: mailto:GreenKeys at mailman.qth.net
This list hosted by: http://www.qsl.net
lease help support this email list: http://www.qsl.net/donate.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/greenkeys/attachments/20111209/b43b481c/attachment.html