[GreenKeys] TTY to Ethernet Converter or TTYoIP

Jim Backus j.backus at jita.demon.co.uk
Mon Aug 1 17:12:02 EDT 2011


Hi Keelan,

That sounds a very interesting project. I would like one when you've 
completed the design.

73

Jim
--
G4PFJ

On 01/08/2011 02:42, Keelan Lightfoot wrote:
> Lee's queries about connecting a teletype to a PC has prompted me to share a project I've been working on.
>
> I'm working on a 'TTY to ethernet' converter, that will eliminate the need for a separate computer entirely. The hardware design is complete, and I have all the pieces needed to build a prototype, I just haven't had the time to put one together. The hardware will occupy a board about the size of a business card, and will include an ethernet port for connecting to a network, and a teletype loop connection (reconfigurable as either half duplex or full duplex).
>
> My initial design was going to use a Lantronix XPort, which is a serial-to-ethernet converter housed in a slightly oversized through hole ethernet jack. The XPort wasn't capable of anything lower than 300 baud, 8 bit operation, so I was going to include a PIC microcontroller to handle the conversion to 45 baud, 5 bit operation. Then I discovered that the same people that make the Xport also make the XPort 'pro', which is the same hardware, but it runs a tiny Linux OS.
>
> I've spent some time poking around the serial driver firmware source, and it supports 5 bit operation out of the box (contrary to the XPort documentation), and with a few changes to the firmware, I will be able to add 45.45, 50 and 75 baud operation.
>
> The idea is to allow a teletype to connect to any internet service that supports telnet, including other teletypes. I've also been working on a 'TTYoIP' server that would allow a number of teletypes to be connected together on a virtual loop via the internet.
>
> Anyway, I'll update as I make more progress on the hardware, but I'm curious if there'd be any interest in this. The fully populated board would probably cost somewhere in the range of $100, most of that cost is for the XPort module, which costs around $70 alone.
>
> - Keelan
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



More information about the GreenKeys mailing list