[GreenKeys] Sprocket Fan-Fold Paper

[DR HOUSE]

There are a couple of outlets that sell the proper paper.  The paper  
industry calls it Fan-fold.  However the main application for these  
blank forms is dot-matrix printers used by many different point of  
sale and warehousing operations.

Most of the paper is TOO WIDE.  You have to be very careful when  
selecting the paper.  For the paper to work on a Model 15 or 28 or 35  
it can be no wider than 8 1/2 inches edge-to-edge.  This paper has no  
tear off margins.  The most desirable length is 11 inches but 5 1/2 or  
8 inch height will also work by changing the form feed disk.

90 percent of the paper that is so-called 8 1/2 inches wide is  
actually 9 1/2 inches wide and tears down to 8 1/2 inches.  This type  
of paper can be used in the M38, M40, M43, M45.

Normal pricing for 3000 sheets is about $50. plus shipping. So do not  
jump until you know for sure what you are purchasing.

Don

K9TTY


On 1 Aug 2011, at 7:04 AM, Bill Riches wrote:

What size paper?  I have a few cases.

Bill,

WA2DVU
Cape May, NJ

Does anybody know where to get a box of sprocket fan-fold paper when I  
run
out of the paper Don sent me?


Thank you all.



AMATEUR/HAM RADIO COMMUNICATIONS OPERATOR / GENERAL CLASS LICENSED
KD4MPW


______________________________________________________________
GreenKeys mailing list
Home: http://mailman.qth.net/mailman/listinfo/greenkeys
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:GreenKeys at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html