[GreenKeys] DTS-1 Test set...

[Ken Gartland]

Hi guys...

Hopefully, one of you will make a ‘Grab’ for this test set...I can personally
vouch for these test sets...While in the  Telecomm’ns industry many yrs ago,
these were the ‘Mainstay’ tests sets...We had tried many other totally electronic
test/analyser sets, and this set outperformed them all...In addition. none of the five (5)
sets we had ever failed, or had to be returned to mfr. for repair and/or re-calibration!

Some yrs later, they were all retired from service...I was very fortunate to get one before
they were scrapped. I  used this same test set recently to ‘Fox’ out 2 M33 TTY’s that
Dave Hunter had brot over from the Telco Museum in P.E.I. It worked perfectly after many yrs of
storage!

These test sets will generate up to 44% distortion, mark or space, and
will also generate/monitor EIA circuits as well.

The particular unit I have is the DTS 1-3, which interestingly enuf uses
an EEPROM to generate the various code choices, which is replaceable in the field
to do other tasks such as EBDIC generation, ASCII + 6lvl  TTS  ( For the M20’s etc.)
I believe the one up for auction is the Military version, hence the BNC Loop connector, and ‘Hard-wired AC pwr
cord!

To sum up, this is the best test set I have ever used. Hopefully one of you will bid and win from the
Greenkeyer group.

Good luck & good bidding


Ken Gartland VE3-HMQ