[GreenKeys] ASR-33 mounting screws

[teletypeparts at aol.com]

Paul,

I have 4 of them and also the washers that I can part with.  They are slightly special (I hate to disagree with Jack, LOL) and the length is critical.  They go into plastic nuts that are held captive in the base of the pan, so be sure and start them carefully and dont overtiten.  

I should have your address, but help me out and I wonder why you didnt ask me direct, since you have  3 or 4 machines that I either worked on for you or sold you. 

I still dont have a QSO in Colorado, so if you're on the air, lets try for one sometime.

73's

Wayne
KB1FDW





-----Original Message-----
From: Paul Heller <paul0926 at comcast.net>
To: GreenKeys at mailman.qth.net
Sent: Sun, May 16, 2010 12:39 pm
Subject: [GreenKeys] ASR-33 mounting screws


I have a teletype and a base, but don't have the screws to mount it. I took the 
crew out of one of my other teletypes and headed out to the local hardware 
tores but cannot find a replacement anywhere locally. I need four screws.
Does anyone have some of these that they could part with?
Thanks,
Paul
D0DFR
_____________________________________________________________
reenKeys mailing list
ome: http://mailman.qth.net/mailman/listinfo/greenkeys
elp: http://mailman.qth.net/mmfaq.htm
ost: mailto:GreenKeys at mailman.qth.net
This list hosted by: http://www.qsl.net
lease help support this email list: http://www.qsl.net/donate.html