[GreenKeys] Model 28 Levelers

[Peter Gottlieb]

Ah, good old normal threads and dimensions.

Now there is so much metric hardware around that I am finding an 
increasing number of applications where I have no matching nuts and 
bolts!  I am going to have to start an entire new collection of bins 
with different size hardware.  It's going to take me a while to be able 
to ID stuff by eye.

Peter


Don Robert House wrote:
> I  bought some at Home Depot for the machine I sent to Pittsburgh.
>
> They are 1/2-18 x 1 1/2 " The head on the original bolts is a 3/4" hex.
>
> Don
>
>
> On 16 Mar 2010, at 12:30 PM, Larry Tighe wrote:
>
> I'm trying to find the correct bolts to replace the 4 levelers on a  
> Model 28 KSR cabinet I'm rebuilding.  Tried many "almosts" but none  
> are quite correct.
>
> Anyone out there that can give me the correct bolt dimensions?
>
> Desperate,
>
> lar
> K2JIA
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>