[GreenKeys] moving an ASR-28 page printer (was: help identifying acouple teletypes? )

[Larry Tighe]

Be damn sure the typing unit is screwed down to the base or you'll have a 
possible disaster should you lay the machine on it's back for transit.

lar
----- Original Message ----- 
From: "Richard" <legalize at xmission.com>
To: <greenkeys at mailman.qth.net>
Sent: Wednesday, July 21, 2010 3:38 PM
Subject: [GreenKeys] moving an ASR-28 page printer (was: help identifying 
acouple teletypes? )


>
> In article <736F927C-7F59-4576-B55C-6C4B537EEEC1 at earthlink.net>,
>    Roy Morgan <k1lky at earthlink.net>  writes:
>
>> Are you thinking of buying one or both?
>
> Possibly.
>
>> If so, you need to know that
>> the ASR-28 weighs a LOT and will not be moved by one person.  You can
>> take it to pieces to lighten it, but I think you'll still need two
>> people to move the  frame.
>>
>> Ask for advice/info on the list to get more experience with them I've
>> never moved an ASR-28.
>
> OK, so I'm asking.  what's the best way to move one of these beasts?
>
> At the pickup site, there is equipment available for moving stuff like
> handcart, pallet jack, forklift, etc.
> -- 
> "The Direct3D Graphics Pipeline" -- DirectX 9 draft available for download
> <http://legalizeadulthood.wordpress.com/the-direct3d-graphics-pipeline/>
>
>      Legalize Adulthood! <http://legalizeadulthood.wordpress.com>
> ______________________________________________________________
> GreenKeys mailing list
> Home: http://mailman.qth.net/mailman/listinfo/greenkeys
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:GreenKeys at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html