[GreenKeys] MMTTY Info for 100 WPM

[Wa3frp]

Hi Wayne, 

In order to change from 45 to 75 baud (100 WPM) when using MMTTY, you must change the rate by going to the Option menu on the MMTTY RTTY Control Panel and selecting Setup. In Setup, go to the Decode tab and use the BaudRate pull-down menu to select "75", then click OK.  Once you select 75 and click OK, you will then be set to send and receive 75 baud.  If for some reason this doesn't work, close the MMTTY window and reopen it and you should be set to 75 baud. 

GL and 73
Russ WA3FRP


Message: 5
Date: Mon, 20 Dec 2010 10:19:59 -0500 (EST)
From: wb0cte at netscape.net
Subject: [GreenKeys] (no subject)
To: greenkeys at mailman.qth.net
Message-ID: <8CD6E708007E5A7-F00-1FFA at web-mmc-m08.sysops.aol.com>
Content-Type: text/plain; charset="us-ascii"

Anyone know how to get MMTTY to run at 100wpm?
?
Wayne? wb0cte