[GreenKeys] Audio output from Heavy Metal?

[Gordon Bousman]

David,
Thanks for your response.  I looked at the schematic for the ST-6000 and
found an RS232 input on the J5 plug.  Now for a newbie question:  Do I have
to convert the voltage levels coming out of the computer serial port or can
this be a direct connection?  I'm not knowledgeable about serial port output
voltages, etc.

Thanks,
Gordon NW7D

Subject: Re: [GreenKeys] Audio output from Heavy Metal ?
To: Gordon Bousman <nw7d.ham at gmail.com>, greenkeys at mailman.qth.net
Message-ID:
       <
090420091320.4079.4AA1143B00005E5000000FEF22230703729B0A02D2089B9A019C04040A0DBF0B01030E02010D at att.net
>


   Why not just feed the serial output to the RS232 input on the 6000?  I
have done this with my 6000. It has been a awhile but I remember doing this.

David
N3BAF
-------------- Original message ----------------------
From: Gordon Bousman <nw7d.ham at gmail.com>
>
> I'm inquiring if there is a method by which get the TTY serial output from
> the Heavy Metal program to go to my sound card?  Currently I feed my Hal
> ST-6000 and Model 28 with audio from my computer sound card - an example
> being printing of the excellent ITTY News.  My hope is that there is a way
> with software to convert the serial output of Heavy Metal program into an
> audio feed (MP3)  - but maybe this is just wishful thinking on my part.
 Any
> suggestions  would be appreciated.
>
> Thanks,
> Gordon NW7D